Forged Johnny Joint 2 1/2 Inch 2.375 Inch X 0.718 Inch Ball 1 1/4 Inch-12 Shank Externally Greased Each RockJock 4x4 Variant:Right Hand Threaded aftermarket ignition

aftermarket ignition

Individual Storage Pouches With Zipper

Our coil conversion kits use this cross member

Equipped with aspheric projector optics

Common clamps on the market require you to remove and dismantle your tie rod to allow the clamp to be slid onto the tie rod tube

Forged Johnny Joint 2 1/2 Inch 2.375 Inch X 0.718 Inch Ball 1 1/4 Inch-12 Shank Externally Greased Each RockJock 4x4 Variant:Right Hand Threaded aftermarket ignitionRockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2 heavy duty,