Ford Pinto Sr 20 Flywheel Boltsm 10 X 1.00 mm Uhl 1.150" 8 Pack Breathers Proflow’s AN flare caps are

Proflow’s AN flare caps are used to block off ports on AN adaptors that are not needed

with aload range of 300

These donuts have a thick 2mm wall and are sold either by the half or complete full donuts that are welded on the outside only

The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs

Part Number: AF315-019-6M

Ford Pinto Sr 20 Flywheel Boltsm 10 X 1.00 mm Uhl 1.150" 8 Pack Breathers Proflow’s AN flare caps arePart Number: AF37 2411 Suits the following applications: ford pinto. nissan sr20. when installing a new flywheel, it is recommended to replace your flywheel bolts as the old factory ones can fatigue over time. These flywheel bolts are made from chrome moly 8740 for high strength compatibilities. They are black oxide to resist rust and corrosion. We recommend the use of loctite 262 or similar so they wont come loose over time. These bolts should be